Skip to content

Jefferson Fire and EMS Frequencies

We do not have frequencies listed specifically for Jefferson in Owen County, Indiana yet. Countywide channels for Owen County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Spencer (Indiana Project Hoosier SAFE-T), about 10 miles away.

About Jefferson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jefferson: Owen County Fire/EMS 154.1450 MHz, narrow FM, 146.2 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Owen County Fire talkgroup 21565 (hex 543d).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jefferson, start with the Spencer site of Indiana Project Hoosier SAFE-T, about 10 miles away. Its control channels: 853.3625, 853.5625 MHz.

Data updated .

Owen County channels that also cover Jefferson

Fire Dispatch

Fire Dispatch frequencies for Owen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Owen County Fire/EMSCounty Fire154.1450
In 159.2850
146.2 PLFMNKZP242

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Owen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Owen County Fire/EMSOwen Valley Fire154.3400FMNWNVK654

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Owen County FireOwen County Fire – Dispatch21565543dD
Owen County FireOwen County Fire – Fire Ground21566543eD
Owen County FireOwen County Fire – Fire Ground21567543fD
Owen County FireOwen County Fire – Fire Ground215685440D
Owen County EMSOwen County EMS – Operations215615439D
Owen County EMSOwen County EMS – Operations21562543aD
Owen County EMSOwen County EMS – Operations21563543bD

Nearest trunked radio sites

Distances are measured from the center of Jefferson.

Spencer · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 60 (hex 3C) · NAC 6BA · about 10 mi away
Control 853.3625, 853.5625
Voice 851.9875, 852.8625, 854.0625
Jasonville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 34 (hex 22) · NAC 6B9 · about 13 mi away
Control 853.3875, 853.725, 853.8875
Voice 851.075, 851.3875, 852.4625, 852.9625
Linton · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 61 (hex 3D) · NAC 6B6 · about 16 mi away
Control 853.75, 859.7375
Voice 851.975, 852.4625, 852.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Jefferson?

We do not have a fire dispatch channel listed specifically for Jefferson. The county-level fire dispatch channels in the same county: Owen County Fire/EMS 154.1450 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Jefferson?

Yes. The county-level systems that cover Jefferson are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Jefferson?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jefferson?

For Jefferson, start with the Spencer site of Indiana Project Hoosier SAFE-T. Its control channels are 853.3625, 853.5625 MHz. Program a control channel first; the scanner finds the voice channels from it.