Skip to content

Pleasant Fire and EMS Frequencies

We do not have frequencies listed specifically for Pleasant in Porter County, Indiana yet. Countywide channels for Porter County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Medaryville (Indiana Project Hoosier SAFE-T), about 11 miles away.

About Pleasant Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pleasant: Porter County Fire/EMS 154.3100 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Pleasant: Porter County Fire/EMS 151.4600 MHz, narrow FM, 114.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Porter County Fire talkgroup 12559 (hex 310f).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pleasant, start with the Medaryville site of Indiana Project Hoosier SAFE-T, about 11 miles away. Its control channels: 853.425, 853.925 MHz.

Data updated .

Porter County channels that also cover Pleasant

Fire Dispatch

Fire Dispatch frequencies for Porter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Porter County Fire/EMSPorter County Fire/EMS – Dispatch154.3100
In 159.0750
114.8 PLFMNWNVJ853

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Porter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Portage Township FireFire Private Channel155.8950FMNWPPU294
Porter County Fire/EMSMittal Steel Fire153.2000141.3 PLFMNKFE921
Porter County Fire/EMSPorter County Fire/EMS – Tactical Channel153.8300114.8 PLFMNWNVJ853
Porter County Fire/EMSPorter County Fire/EMS – Tactical Channel154.1300114.8 PLFMNWNVJ853
Porter County Fire/EMSPorter County Fire/EMS – Tactical Channel154.2350114.8 PLFMNWNVJ853
Porter County Fire/EMSPorter County Fire/EMS – Tactical Channel154.2800114.8 PLFMNWNVJ853
Porter County Fire/EMSPorter County Fire/EMS – Tactical Channel154.4450114.8 PLFMNWNVJ853

EMS Dispatch

EMS Dispatch frequencies for Porter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Porter County Fire/EMSPorter Hospital EMS151.4600
In 153.7850
114.8 PLFMNWPPX683
Porter County Fire/EMSPorter County Fire/EMS – Dispatch155.2350
In 150.7750
110.9 PLFMNKKU309

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Porter County FireCounty Fire Dispatch12559310fD
Porter County FireCountywide Fireground Operations121282f60D
Porter County FireCountywide Fire/EMS Talkaround121312f63D
Porter County FireCountywide Fireground Operations121322f64D
Porter County FireCountywide Fireground Operations121332f65D
Porter County FireCountywide Fireground Operations121342f66D
Porter County FireCountywide Fire Emergency1254130fdD
Porter County FireValparasio Fire – Fireground12558310eD
Porter County EMSCounty Health Department121252f5dD
Porter County EMSPorter County EMS Operations Talk-Around12557310dD

Nearest trunked radio sites

Distances are measured from the center of Pleasant.

Medaryville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 17 (hex 11) · NAC 6B7 · about 11 mi away
Control 853.425, 853.925
Voice 851.425, 851.925, 852.925
Porter Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 8 (hex 8) · NAC 6B8 · about 13 mi away
Control 771.29375, 771.55625, 771.56875
Voice 769.10625, 769.11875, 769.55625, 769.56875, 769.83125, 769.84375, 771.03125, 771.04375, 771.28125
INDOC Westville Correctional Center · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 90 (hex 5A) · NAC 6B0 · about 17 mi away
Control 859.7375
Voice 855.2125, 855.4625, 858.2125, 859.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pleasant?

We do not have a fire dispatch channel listed specifically for Pleasant. The county-level fire dispatch channels in the same county: Porter County Fire/EMS 154.3100 MHz, narrow FM, 114.8 PL.

What frequency does EMS or the ambulance service use in Pleasant?

We do not have a EMS dispatch channel listed specifically for Pleasant. The county-level EMS dispatch channels in the same county: Porter County Fire/EMS 151.4600 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Pleasant?

Yes. The county-level systems that cover Pleasant are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pleasant?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pleasant?

For Pleasant, start with the Medaryville site of Indiana Project Hoosier SAFE-T. Its control channels are 853.425, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.