Skip to content

Van Bibber Lake Fire and EMS Frequencies

We do not have frequencies listed specifically for Van Bibber Lake in Putnam County, Indiana yet. Countywide channels for Putnam County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bainbridge (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Van Bibber Lake Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Van Bibber Lake: Putnam County Fire/EMS 151.4750 MHz, narrow FM, 186.2 PL. County-level ems dispatch that covers Van Bibber Lake: Putnam County Fire/EMS 155.2200 MHz, narrow FM, 100.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Putnam County Fire talkgroup 12159 (hex 2f7f).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Van Bibber Lake, start with the Bainbridge site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 853.0625, 854.3875 MHz.

Data updated .

Putnam County channels that also cover Van Bibber Lake

Fire Dispatch

Fire Dispatch frequencies for Putnam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Putnam County Fire/EMSFillmore Floyd Township Volunteer Fire Department Dispatch151.4750
In 153.9350
186.2 PLFMNWQAZ414
Putnam County Fire/EMSCounty Fire – Dispatch154.3850186.2 PLFMNWPJI578
Putnam County Fire/EMSCloverdale Township Fire154.4150114.8 PLFMNKLF716

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Putnam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Putnam County Fire/EMSWalnut Township Fire and EMS151.1900186.2 PLFMNWQRL912
Putnam County Fire/EMSEmergency Management (EMA w/Putnam Co CERT Team)155.7000
In 159.2100
192.8 PLFMNWQOY685
Putnam County Fire/EMS911 Standby Repeater854.0125
In 809.0125
156.7 PLFMNWQON322

EMS Dispatch

EMS Dispatch frequencies for Putnam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Putnam County Fire/EMSOperation Life EMS – Dispatch155.2200100.0 PLFMNKEK746

EMS Tactical

EMS Tactical frequencies for Putnam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Putnam County Fire/EMSOperation Life EMS – Operations463.1750
In 468.1750
151.4 PLFMNKEK746

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Putnam County FireCounty Fire Dispatch121592f7fD
Putnam County FireCounty Fireground121552f7bD
Putnam County FireCounty Fireground121562f7cD
Putnam County FireCounty Fireground121572f7dD
Putnam County FireCounty Fireground121582f7eD
Putnam County FireCounty Fireground121702f8aD
Putnam County EMSEMS to County Hospital121632f83D
Putnam County EMSCounty EMS Operations121642f84D
Putnam County EMSCounty EMS Operations121652f85D

Nearest trunked radio sites

Distances are measured from the center of Van Bibber Lake.

Bainbridge · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 81 (hex 51) · NAC 6B1 · about 7 mi away
Control 853.0625, 854.3875
Voice 851.3875, 851.8625, 852.2
Putnamville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 35 (hex 23) · NAC 6B5 · about 11 mi away
Control 852.925, 853.425, 853.925
Voice 851.425, 851.925, 852.875
Bridgeton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 82 (hex 52) · NAC 6B2 · about 14 mi away
Control 853.9625, 859.4875
Voice 851.4625, 852.4875, 852.9875, 853.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Van Bibber Lake?

We do not have a fire dispatch channel listed specifically for Van Bibber Lake. The county-level fire dispatch channels in the same county: Putnam County Fire/EMS 151.4750 MHz, narrow FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Van Bibber Lake?

We do not have a EMS dispatch channel listed specifically for Van Bibber Lake. The county-level EMS dispatch channels in the same county: Putnam County Fire/EMS 155.2200 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Van Bibber Lake?

Yes. The county-level systems that cover Van Bibber Lake are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Van Bibber Lake?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Van Bibber Lake?

For Van Bibber Lake, start with the Bainbridge site of Indiana Project Hoosier SAFE-T. Its control channels are 853.0625, 854.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.