About Wayne Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Wayne: Randolph County Fire 154.1300 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Wayne: Culberson Ambulance Service 155.2350 MHz, FM, 114.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Randolph County Fire talkgroup 12173 (hex 2f8d).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups; Randolph County Government: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wayne, start with the Union City site of Indiana Project Hoosier SAFE-T, about 2 miles away. Its control channels: 853.45, 853.925 MHz.
Data updated .
Randolph County channels that also cover Wayne
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Randolph County Fire | Fire/EMS Dispatch | 154.1300 In 150.8050 | 114.8 PL | FMN | KNNS706 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Randolph County Fire | Firre/EMS Operations | 154.2800 | 114.8 PL | FMN | KNNS706 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Culberson Ambulance Service | Culberson Ambulance Service | 155.2350 In 153.6200 | 114.8 PL | FM | — |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Randolph County Fire | County Fire Dispatch | 12173 | 2f8d | D |
| Randolph County EMS | County EMS Dispatch | 12172 | 2f8c | D |
Randolph County Government
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Randolph County Fire | County Fire Dispatch | 10016 | 2720 | D |
| Randolph County Fire | County Fireground | 10018 | 2722 | D |
| Randolph County Fire | County Fireground | 10019 | 2723 | D |
| Randolph County Fire | County Fireground | 10020 | 2724 | D |
| Randolph County Fire | County Fireground | 10021 | 2725 | D |
| Randolph County Fire | County Fire Water Operations | 10024 | 2728 | D |
| Randolph County EMS | County EMS Dispatch | 10030 | 272e | D |
| Randolph County EMS | County EMS Operations | 10031 | 272f | D |
| Randolph County EMS | County EMS Operations | 10032 | 2730 | D |
| Randolph County EMS | County EMS Operations | 10033 | 2731 | D |
| Randolph County EMS | County EMS Operations | 10034 | 2732 | D |
Nearest trunked radio sites
Distances are measured from the center of Wayne.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Wayne?
We do not have a fire dispatch channel listed specifically for Wayne. The county-level fire dispatch channels in the same county: Randolph County Fire 154.1300 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Wayne?
We do not have a EMS dispatch channel listed specifically for Wayne. The county-level EMS dispatch channels in the same county: Culberson Ambulance Service 155.2350 MHz, FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Wayne?
Yes. The county-level systems that cover Wayne are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups; Randolph County Government: 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wayne?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wayne?
For Wayne, start with the Union City site of Indiana Project Hoosier SAFE-T. Its control channels are 853.45, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.