About Laughery Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Laughery: Ripley County Fire 154.2350 MHz, narrow FM, CSQ. County-level ems dispatch that covers Laughery: Ripley County EMS 155.2050 MHz, narrow FM, CSQ. Trunked: Indiana Project Hoosier SAFE-T, for example Ripley County Fire talkgroup 21610 (hex 546a).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Laughery, start with the Batesville site of Indiana Project Hoosier SAFE-T, about 2 miles away. Its control channels: 852.125, 853.2125, 853.8125 MHz.
Data updated .
Ripley County channels that also cover Laughery
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ripley County Fire | Ripley County Fire – Fire Ground (former Dispatch South) | 154.2350 | CSQ | FMN | WQM259 |
| Ripley County Fire | Ripley County Fire – Dispatch – Simulcast (5 Sites) | 155.9325 In 153.8525 | 516 DPL | FMN | WRVG498 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ripley County Fire | EMA | 151.0550 | 100.0 PL | FMN | KJX494 |
| Ripley County Fire | Ripley County Fire – Fire Ground | 154.1900 | CSQ | FMN | WQM259 |
| Ripley County Fire | Ripley County Fire – Fire Ground (Channel 3) | 154.2650 | FMN | WQM259 | |
| Ripley County Fire | Ripley County Fire – Fire Ground (Channel 4) | 154.9950 | FMN | KJX494 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ripley County EMS | Ripley County EMS – Dispatch | 155.2050 | CSQ | FMN | KNEQ243 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ripley County Fire | County Fire/EMS Dispatch | 21610 | 546a | D |
| Ripley County Fire | County Fire/EMS Operations | 21611 | 546b | D |
| Ripley County Fire | County Fire/EMS Operations | 21612 | 546c | D |
| Ripley County Fire | County Fire/EMS Operations | 21613 | 546d | D |
Nearest trunked radio sites
Distances are measured from the center of Laughery.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Laughery?
We do not have a fire dispatch channel listed specifically for Laughery. The county-level fire dispatch channels in the same county: Ripley County Fire 154.2350 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Laughery?
We do not have a EMS dispatch channel listed specifically for Laughery. The county-level EMS dispatch channels in the same county: Ripley County EMS 155.2050 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Laughery?
Yes. The county-level systems that cover Laughery are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Laughery?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Laughery?
For Laughery, start with the Batesville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.125, 853.2125, 853.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.