Skip to content

Shelby Fire and EMS Frequencies

We do not have frequencies listed specifically for Shelby in Ripley County, Indiana yet. Countywide channels for Ripley County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Versailles (Indiana Project Hoosier SAFE-T), about 9 miles away.

About Shelby Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Shelby: Ripley County Fire 154.2350 MHz, narrow FM, CSQ. County-level ems dispatch that covers Shelby: Ripley County EMS 155.2050 MHz, narrow FM, CSQ. Trunked: Indiana Project Hoosier SAFE-T, for example Ripley County Fire talkgroup 21610 (hex 546a).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Shelby, start with the Versailles site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 851.95, 852.475, 852.7125 MHz.

Data updated .

Ripley County channels that also cover Shelby

Fire Dispatch

Fire Dispatch frequencies for Ripley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ripley County FireRipley County Fire – Fire Ground (former Dispatch South)154.2350CSQFMNWQM259
Ripley County FireRipley County Fire – Dispatch – Simulcast (5 Sites)155.9325
In 153.8525
516 DPLFMNWRVG498

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ripley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ripley County FireEMA151.0550100.0 PLFMNKJX494
Ripley County FireRipley County Fire – Fire Ground154.1900CSQFMNWQM259
Ripley County FireRipley County Fire – Fire Ground (Channel 3)154.2650FMNWQM259
Ripley County FireRipley County Fire – Fire Ground (Channel 4)154.9950FMNKJX494

EMS Dispatch

EMS Dispatch frequencies for Ripley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ripley County EMSRipley County EMS – Dispatch155.2050CSQFMNKNEQ243

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Ripley County FireCounty Fire/EMS Dispatch21610546aD
Ripley County FireCounty Fire/EMS Operations21611546bD
Ripley County FireCounty Fire/EMS Operations21612546cD
Ripley County FireCounty Fire/EMS Operations21613546dD

Nearest trunked radio sites

Distances are measured from the center of Shelby.

Versailles · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 29 (hex 1D) · NAC 6B2 · about 9 mi away
Control 851.95, 852.475, 852.7125, 853.3875
Voice 851.425
North Vernon · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 47 (hex 2F) · NAC 6B4 · about 14 mi away
Control 852.4375, 853.3375
Voice 851.3875, 851.6, 851.9
Madison · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 31 (hex 1F) · NAC 6B3 · about 15 mi away
Control 857.9625, 858.5125, 858.9625, 859.9625
Voice 853.8625, 856.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Shelby?

We do not have a fire dispatch channel listed specifically for Shelby. The county-level fire dispatch channels in the same county: Ripley County Fire 154.2350 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Shelby?

We do not have a EMS dispatch channel listed specifically for Shelby. The county-level EMS dispatch channels in the same county: Ripley County EMS 155.2050 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Shelby?

Yes. The county-level systems that cover Shelby are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Shelby?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Shelby?

For Shelby, start with the Versailles site of Indiana Project Hoosier SAFE-T. Its control channels are 851.95, 852.475, 852.7125, 853.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.