About California Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers California: Starke County Fire/EMS 153.7400 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers California: Starke County Fire/EMS 154.1150 MHz, narrow FM, 97.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Starke County Fire talkgroup 12295 (hex 3007).
- 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For California, start with the Bass Lake site of Indiana Project Hoosier SAFE-T, about 2 miles away. Its control channels: 853.3375, 853.7375 MHz.
Data updated .
Starke County channels that also cover California
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Starke County Fire/EMS | County Fire Dispatch | 153.7400 In 151.4150 | 100.0 PL | FMN | KSB416 |
| Starke County Fire/EMS | UHF Link – San Pierre | 453.3125 | CSQ | FMN | WQBQ325 |
| Starke County Fire/EMS | UHF Link – San Pierre | 453.5375 | CSQ | FMN | WQBQ325 |
| Starke County Fire/EMS | UHF Link – Knox | 458.3125 | CSQ | FMN | WQBQ325 |
| Starke County Fire/EMS | UHF Link – Knox | 458.5375 | CSQ | FMN | WQBQ325 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Starke County Fire/EMS | Starke County Fire/EMS – Tactical Channel (Channel 5) | 153.7625 | 712 DPL | FMN | — |
| Starke County Fire/EMS | Starke County Fire/EMS – Tactical Channel (Channel 4) | 153.8450 | 97.4 PL | FMN | — |
| Starke County Fire/EMS | Starke County Fire/EMS – Tactical Channel (Channel 6) | 154.0100 | 712 DPL | FMN | — |
| Starke County Fire/EMS | Starke County Fire/EMS – Tactical Channel (Channel 3) | 154.2800 | CSQ | FMN | — |
| Starke County Fire/EMS | Starke County Fire/EMS – Fire Ground | 154.3700 | 100.0 PL | FMN | KNJR759 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Starke County Fire/EMS | Starke County Fire/EMS – Fire Ground (Channel 2) | 153.7400 | 100.0 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Starke County Fire/EMS | Starke County Fire/EMS – Dispatch | 154.1150 | 97.4 PL | FMN | WQB718 |
| Starke County Fire/EMS | Starke EMS Dispatch | 155.6625 | 712 DPL | FMN | — |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Starke County Fire | Starke County Fire – Dispatch | 12295 | 3007 | D |
| Starke County Fire | Starke County Fire – Fire Ground | 12296 | 3008 | D |
| Starke County Fire | Starke County Fire – Fire Ground | 12297 | 3009 | D |
| Starke County Fire | Starke County Fire – Fire Ground | 12298 | 300a | D |
| Starke County Fire | Starke County Fire – Fire Ground | 12299 | 300b | D |
| Starke County EMS | Starke County EMS – Dispatch | 12291 | 3003 | D |
| Starke County EMS | Starke County EMS – Operations | 12292 | 3004 | D |
| Starke County EMS | Starke County EMS – Operations | 12293 | 3005 | D |
| Starke County EMS | Starke County EMS – Operations | 12294 | 3006 | D |
Nearest trunked radio sites
Distances are measured from the center of California.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in California?
We do not have a fire dispatch channel listed specifically for California. The county-level fire dispatch channels in the same county: Starke County Fire/EMS 153.7400 MHz, narrow FM, 100.0 PL.
What frequency does EMS or the ambulance service use in California?
We do not have a EMS dispatch channel listed specifically for California. The county-level EMS dispatch channels in the same county: Starke County Fire/EMS 154.1150 MHz, narrow FM, 97.4 PL.
Do fire departments and EMS use a trunked radio system in California?
Yes. The county-level systems that cover California are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in California?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in California?
For California, start with the Bass Lake site of Indiana Project Hoosier SAFE-T. Its control channels are 853.3375, 853.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.