Skip to content

Pleasant Fire and EMS Frequencies

We do not have frequencies listed specifically for Pleasant in Steuben County, Indiana yet. Countywide channels for Steuben County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Steuben Co Simulcast (Indiana Project Hoosier SAFE-T), about 2 miles away.

About Pleasant Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pleasant: Fire/EMS/Emergency Management 154.4300 MHz, narrow FM, 77.0 PL (old). Trunked: Indiana Project Hoosier SAFE-T, for example Steuben County Fire talkgroup 12667 (hex 317b).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pleasant, start with the Steuben Co Simulcast site of Indiana Project Hoosier SAFE-T, about 2 miles away. Its control channels: 852.975, 853.45 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Steuben County channels that also cover Pleasant

Fire Dispatch

Fire Dispatch frequencies for Steuben County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency Management OldFire/EMS/Emergency Management – Paging154.430077.0 PLFMNWNJG213

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Steuben County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Mutual Aid with De Kalb County154.355077.0 PLFMNWNJG213
Fire/EMS/Emergency Management BackupEmergency Management155.0550
In 156.0150
FMNKNFM529
Metz Fire (Angola)Metz Fire (Angola) – Tactical Channel155.8800FMNWPAY773
Salem Fire (Hudson)Operations with LaGrange County154.370091.5 PLFMNKNGC337

Fire Talk-around

Fire Talk-around frequencies for Steuben County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Steuben Township (Pleasant Lake)Steuben Township (Pleasant Lake) – Private154.7250FMNWPHJ768

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Steuben County FireCounty Fire – Dispatch12667317bD
Steuben County EMSCounty EMS – Dispatch12666317aD
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Steuben County HospitalEMS-to-Hospital ER – MED126643178D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Pleasant.

Steuben Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 6 (hex 6) · NAC 6B6 · about 2 mi away
Control 852.975, 853.45
Voice 851.1625, 851.375, 851.9375, 853.1125, 853.9125, 856.2125, 857.2125, 858.2125, 859.2125
Angola · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 44 (hex 2C) · NAC 6B5 · about 2 mi away
Control 853.45, 853.9125
Voice 851.375, 851.9375, 852.975
Lagrange · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 42 (hex 2A) · NAC 6BB · about 20 mi away
Control 853.225, 853.425
Voice 851.2375, 851.7125, 851.8625, 852.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pleasant?

We do not have a fire dispatch channel listed specifically for Pleasant. The county-level fire dispatch channels in the same county: Fire/EMS/Emergency Management 154.4300 MHz, narrow FM, 77.0 PL (old).

Do fire departments and EMS use a trunked radio system in Pleasant?

Yes. The county-level systems that cover Pleasant are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pleasant?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pleasant?

For Pleasant, start with the Steuben Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels are 852.975, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.