Skip to content

Gill Fire and EMS Frequencies

We do not have frequencies listed specifically for Gill in Sullivan County, Indiana yet. Countywide channels for Sullivan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Paxton (Indiana Project Hoosier SAFE-T), about 6 miles away.

About Gill Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Gill: Sullivan County Fire 154.2500 MHz, narrow FM, 203.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Sullivan County Fire talkgroup 12320 (hex 3020).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gill, start with the Paxton site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 852.9125, 853.4125 MHz.

Data updated .

Sullivan County channels that also cover Gill

Fire Dispatch

Fire Dispatch frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sullivan County FireSullivan County Fire – Dispatch – East154.2500
In 159.2700
203.5 PLFMNKAV729
Sullivan County FireSullivan County Fire – Dispatch Main155.8950
In 150.7750
203.5 PLFMNWPRG701

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sullivan City FireSullivan City Fire – Tactical153.8900FMNKAV729

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Sullivan County FireSullivan County Fire – Dispatch123203020D
Sullivan County FireSullivan County Fire – Operations123213021D
Sullivan County FireSullivan County Fire – Operations123223022D
Sullivan County EMSSullivan County EMS – Operations12319301fD

Nearest trunked radio sites

Distances are measured from the center of Gill.

Paxton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 86 (hex 56) · NAC 6BA · about 6 mi away
Control 852.9125, 853.4125
Voice 851.4125, 851.9125, 852.4125
Graysville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 85 (hex 55) · NAC 6B2 · about 7 mi away
Control 853.7875, 853.9875
Voice 851.1375, 851.4875, 852.8875
Linton · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 61 (hex 3D) · NAC 6B6 · about 18 mi away
Control 853.75, 859.7375
Voice 851.975, 852.4625, 852.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Gill?

We do not have a fire dispatch channel listed specifically for Gill. The county-level fire dispatch channels in the same county: Sullivan County Fire 154.2500 MHz, narrow FM, 203.5 PL.

Do fire departments and EMS use a trunked radio system in Gill?

Yes. The county-level systems that cover Gill are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Gill?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Gill?

For Gill, start with the Paxton site of Indiana Project Hoosier SAFE-T. Its control channels are 852.9125, 853.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.