About Liberty Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Liberty: Fire/EMS/Emergency Management 154.4300 MHz, narrow FM, 107.2 PL. County-level ems dispatch that covers Liberty: Fire/EMS/Emergency Management 151.1075 MHz, narrow FM, 100.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Warren County EMS talkgroup 10263 (hex 2817).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Liberty, start with the Attica site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 853.4375, 853.9375 MHz.
Data updated .
Warren County channels that also cover Liberty
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Dispatch | 154.4300 In 159.0525 | 107.2 PL | FMN | WPLS514 |
| Fire/EMS/Emergency Management | Pine Village Fire Dispatch | 155.6700 In 154.0700 | 186.2 PL | FMN | WSLK648 |
| Fire/EMS/Emergency Management Backup | Emergency Services (WIlliamsport) | 857.6375 In 812.6375 | 186.2 PL | FMN | WQYG207 |
| Fire/EMS/Emergency Management Backup | Fire/EMS/Emergency Management – Dispatch (WIlliamsport) | 858.6375 In 813.6375 | 186.2 PL | FMN | WQYG207 |
| Fire/EMS/Emergency Management Backup | Fire/EMS/Emergency Management – Dispatch (Williamsport) | 859.6375 In 814.6375 | 186.2 PL | FMN | WQYG207 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Fire Ground / Vehicular Repeaters | 153.9500 | CSQ | FMN | WNBX912 |
| Fire/EMS/Emergency Management | EMA – Operations 2/Tactical | 153.9650 | FMN | WPZX241 | |
| Fire/EMS/Emergency Management Backup | Emergency Services (West Lebanon) | 854.6875 In 809.6875 | 186.2 PL | FMN | WSGC285 |
| Fire/EMS/Emergency Management Backup | Emergency Services (Pine Village) | 856.0875 In 811.0875 | 186.2 PL | FMN | WSGC285 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Tone-Outs/Dispatch | 151.1075 In 156.0150 | 100.0 PL | FMN | WPZX241 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Warren County EMS | Warren County EMS – Dispatch (County) | 10263 | 2817 | D |
| Warren County EMS | Warren County EMS – Operations (County) | 12428 | 308c | D |
| Warren County Hospital | Hospital (Patient Reports??) | 12432 | 3090 | D |
Nearest trunked radio sites
Distances are measured from the center of Liberty.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Liberty?
We do not have a fire dispatch channel listed specifically for Liberty. The county-level fire dispatch channels in the same county: Fire/EMS/Emergency Management 154.4300 MHz, narrow FM, 107.2 PL.
What frequency does EMS or the ambulance service use in Liberty?
We do not have a EMS dispatch channel listed specifically for Liberty. The county-level EMS dispatch channels in the same county: Fire/EMS/Emergency Management 151.1075 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Liberty?
Yes. The county-level systems that cover Liberty are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Liberty?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Liberty?
For Liberty, start with the Attica site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.