About Ohio Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Ohio: Warrick County Fire 154.4450 MHz, narrow FM, 91.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Warrick County Fire talkgroup 21675 (hex 54ab).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Ohio, start with the Yankeetown site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 852.9875, 853.8 MHz.
Data updated .
Warrick County channels that also cover Ohio
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warrick County Fire | Warrick County Fire – Dispatch | 154.4450 In 159.3600 | 91.5 PL | FMN | WSGG878 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warrick County Fire | Warrick County Fire – Talkaround | 453.6875 | 91.5 PL | FMN | WPUW590 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Warrick County Fire | Warrick County Fire – Dispatch | 21675 | 54ab | D |
| Warrick County Fire | Warrick County Fire – Fire Ground | 21676 | 54ac | D |
| Warrick County Fire | Warrick County Fire – Fire Ground | 21677 | 54ad | D |
| Warrick County Fire | Warrick County Fire – Fire Ground | 21678 | 54ae | D |
| Warrick County Fire | Warrick County Fire – Fire Ground | 21679 | 54af | D |
| Warrick County EMS | Warrick County EMS – Dispatch | 21673 | 54a9 | D |
| Warrick County EMS | Warrick County EMS – Operations | 21674 | 54aa | D |
Nearest trunked radio sites
Distances are measured from the center of Ohio.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Ohio?
We do not have a fire dispatch channel listed specifically for Ohio. The county-level fire dispatch channels in the same county: Warrick County Fire 154.4450 MHz, narrow FM, 91.5 PL.
Do fire departments and EMS use a trunked radio system in Ohio?
Yes. The county-level systems that cover Ohio are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Ohio?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Ohio?
For Ohio, start with the Yankeetown site of Indiana Project Hoosier SAFE-T. Its control channels are 852.9875, 853.8 MHz. Program a control channel first; the scanner finds the voice channels from it.