About Jefferson Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Jefferson: Washington County Fire 155.4900 MHz, narrow FM, 167.9 PL. County-level ems dispatch that covers Jefferson: Washington County EMS 155.9025 MHz, NXDN48, RAN 22. Trunked: Indiana Project Hoosier SAFE-T, for example Washington County Fire talkgroup 21694 (hex 54be).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Jefferson, start with the Salem site of Indiana Project Hoosier SAFE-T, about 4 miles away. Its control channels: 853.975 MHz.
Data updated .
Washington County channels that also cover Jefferson
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Washington County Fire – Repeater | 155.4900 In 153.9950 | 167.9 PL | FMN | WQF450 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Washington County Fire – Posey Twp | 151.2725 In 159.3225 | FMN | WQFB901 | |
| Washington County Fire | Washington County Fire – Tactical Channel | 153.9950 | FMN | WQF450 | |
| Washington County Fire | Washington County Fire – Tactical Channel | 154.1900 | 167.9 PL | FMN | WQF450 |
| Washington County Fire | Emergency Management Agency | 155.9400 | FMN | WNKG271 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County EMS | Washington County EMS – Dispatch | 155.9025 | RAN 22 | NXDN48 | WQF450 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Washington County Fire | Washington County Fire – Dispatch (County) | 21694 | 54be | D |
| Washington County Fire | Washington County Fire – Operations (County) | 21695 | 54bf | D |
| Washington County Fire | Washington County Fire – Tactical Channel (County) | 21696 | 54c0 | D |
| Washington County EMS | Washington County EMS – Dispatch (County) | 21691 | 54bb | D |
| Washington County EMS | Washington County EMS – Operations (County) | 21692 | 54bc | D |
| Washington County EMS | Washington County EMS – Tactical Channel (County) | 21693 | 54bd | D |
Nearest trunked radio sites
Distances are measured from the center of Jefferson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Jefferson?
We do not have a fire dispatch channel listed specifically for Jefferson. The county-level fire dispatch channels in the same county: Washington County Fire 155.4900 MHz, narrow FM, 167.9 PL.
What frequency does EMS or the ambulance service use in Jefferson?
We do not have a EMS dispatch channel listed specifically for Jefferson. The county-level EMS dispatch channels in the same county: Washington County EMS 155.9025 MHz, NXDN48, RAN 22.
Do fire departments and EMS use a trunked radio system in Jefferson?
Yes. The county-level systems that cover Jefferson are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Jefferson?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Jefferson?
For Jefferson, start with the Salem site of Indiana Project Hoosier SAFE-T. Its control channels are 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.