Skip to content

Jefferson Fire and EMS Frequencies

We do not have frequencies listed specifically for Jefferson in Wells County, Indiana yet. Countywide channels for Wells County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bluffton (Indiana Project Hoosier SAFE-T), about 9 miles away.

About Jefferson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jefferson: Wells County Fire 154.1750 MHz, narrow FM, 82.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Wells County Fire talkgroup 12451 (hex 30a3).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jefferson, start with the Bluffton site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 858.9625, 859.9625 MHz.

Data updated .

Wells County channels that also cover Jefferson

Fire Dispatch

Fire Dispatch frequencies for Wells County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wells County FireWells County Fire – Dispatch154.175082.5 PLFMNWNHI522

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wells County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wells County FireWells County Fire – Fire Ground153.980082.5 PLFMNKNDN884
Wells County FireWells County Fire – Fire Ground154.2800CSQFMNKNDN884

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Wells County FireWells County Fire – Dispatch (County)1245130a3D
Wells County FireWells County Fire – Operations (County)1245230a4D
Wells County FireWells County Fire – Operations (County)1245330a5D
Wells County EMSWells County EMS – Dispatch (County)1245030a2D

Nearest trunked radio sites

Distances are measured from the center of Jefferson.

Bluffton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 51 (hex 33) · NAC 6BA · about 9 mi away
Control 858.9625, 859.9625
Voice 851.25, 851.775, 852.8875, 853.9125, 857.9625
Monroe · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 52 (hex 34) · NAC 6B2 · about 12 mi away
Control 853.4375, 853.9625
Voice 851.4625, 852.4, 852.9625
Government Services · Allen County P25
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 590 · about 15 mi away
Control 858.7625, 858.9375, 859.7625, 859.9375
Voice 855.7125, 856.1625, 856.5125, 856.7625, 856.9375, 857.7625, 857.9375, 858.4875, 858.6625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Jefferson?

We do not have a fire dispatch channel listed specifically for Jefferson. The county-level fire dispatch channels in the same county: Wells County Fire 154.1750 MHz, narrow FM, 82.5 PL.

Do fire departments and EMS use a trunked radio system in Jefferson?

Yes. The county-level systems that cover Jefferson are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Jefferson?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jefferson?

For Jefferson, start with the Bluffton site of Indiana Project Hoosier SAFE-T. Its control channels are 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.