Skip to content

Watkins Fire and EMS Frequencies

We do not have frequencies listed specifically for Watkins in Benton County, Iowa yet. Countywide channels for Benton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Williamsburg (Iowa Statewide Interoperable Communications System (ISICS)), about 13 miles away.

About Watkins Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Watkins: Benton County Fire 151.0100 MHz, narrow FM, 110.9 PL; RF Remote Links Fire 453.7875 MHz, narrow FM, 261 DPL.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Benton County channels that also cover Watkins

Fire Dispatch

Fire Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County FireBenton County Fire – Dispatch – Keystone and Mt Auburn Towers151.0100
In 154.4000
110.9 PLFMNWQTE289
Benton County FireBenton County Fire – Dispatch – Newhall Tower151.0175
In 154.4000
110.9 PLFMNWQTE308
Benton County FireBenton County Fire – Dispatch – Urbana Tower (Blairstown Tower offline)151.4825
In 154.4000
110.9 PLFMNWQTE308
Benton County FireBenton County Fire – Dispatch – Belle Plaine and Shellsburg Towers156.1650
In 154.4000
110.9 PLFMNWQTE289
Benton County FireBenton County Fire – Dispatch – Luzurne and Garrison Towers158.7450
In 154.4000
110.9 PLFMNWQTE289
Benton County FireBenton County Fire – Dispatch – Atkins Tower159.2850
In 154.4000
110.9 PLFMNWQTE289
Benton County FireBenton County Fire – Dispatch – Van Horne Tower159.3750
In 154.4000
110.9 PLFMNWQTE308
Benton County FireBenton County Fire – Dispatch – Norway Tower159.4125
In 154.4000
110.9 PLFMNWQTE308
RF Remote Links FireRF Remote Links Fire – Dispatch453.7875261 DPLFMNWPVS680
RF Remote Links FireRF Remote Links Fire – Dispatch458.8625627 DPLFMNWPVS680

Nearest trunked radio sites

Distances are measured from the center of Watkins.

Williamsburg · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 45 (hex 2D) · NAC 4C1 · about 13 mi away
Control 774.06875, 774.31875, 774.81875
Voice 774.56875
Linn/Johnson Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 13 (hex D) · NAC 4C0 · about 19 mi away
Control 769.91875, 770.16875, 770.41875
Voice 769.66875
Tama · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 38 (hex 26) · NAC 4C0 · about 30 mi away
Control 770.21875, 770.46875, 770.96875
Voice 770.71875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Watkins?

We do not have a fire dispatch channel listed specifically for Watkins. The county-level fire dispatch channels in the same county: Benton County Fire 151.0100 MHz, narrow FM, 110.9 PL; RF Remote Links Fire 453.7875 MHz, narrow FM, 261 DPL.

What scanner do I need to listen to fire and EMS in Watkins?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Watkins?

For Watkins, start with the Williamsburg site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.06875, 774.31875, 774.81875 MHz. Program a control channel first; the scanner finds the voice channels from it.