Skip to content

Downey Fire and EMS Frequencies

We do not have frequencies listed specifically for Downey in Cedar County, Iowa yet. Countywide channels for Cedar County that may also cover this area are shown below when we have them. The closest trunked radio site we have is West Liberty (Iowa Statewide Interoperable Communications System (ISICS)), about 5 miles away.

About Downey Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Downey: Cedar County Fire 154.4150 MHz, narrow FM, 141.3 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Cedar County channels that also cover Downey

Fire Dispatch

Fire Dispatch frequencies for Cedar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cedar County FireCedar County Fire – Dispatch154.4150
In 156.1500
141.3 PLFMNWPUL705
Cedar County FireFire Operations154.4150
In 156.1500
NAC 064P25WPUL705

Nearest trunked radio sites

Distances are measured from the center of Downey.

West Liberty · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 148 (hex 94) · NAC 4C1 · about 5 mi away
Control 856.1625
Voice 854.2875, 854.6875, 857.4875
Conesville · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 70 (hex 46) · about 16 mi away
Control 856.5375
Voice 854.0375, 854.3375, 855.4875
Wilton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 149 (hex 95) · NAC 4C3 · about 16 mi away
Control 857.5375
Voice 854.4125, 856.1875, 858.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Downey?

We do not have a fire dispatch channel listed specifically for Downey. The county-level fire dispatch channels in the same county: Cedar County Fire 154.4150 MHz, narrow FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in Downey?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Downey?

For Downey, start with the West Liberty site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 856.1625 MHz. Program a control channel first; the scanner finds the voice channels from it.