About Roseville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Roseville: Floyd County Fire 154.4150 MHz, FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Floyd County Fire talkgroup 29711 (hex 740f).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Roseville, start with the Floyd Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 3 miles away. Its control channels: 774.33125 MHz.
Data updated .
Floyd County channels that also cover Roseville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Floyd County Fire | Floyd County Fire – Dispatch – 85.4 PL??? | 154.4150 | CSQ | FM | KDQ201 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Floyd County Hospital | Memorial Hospital | 155.3250 | FM | KJN743 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Floyd County Fire | Fire Main | 29711 | 740f | T |
| Floyd County Fire | Floyd County Fire – Tactical Channel | 29712 | 7410 | T |
| Floyd County Fire | Water Suppply | 29721 | 7419 | T |
| Floyd County Fire | SAR Tactical | 29729 | 7421 | T |
| Floyd County EMS | EMS Main | 29722 | 741a | T |
Nearest trunked radio sites
Distances are measured from the center of Roseville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Roseville?
We do not have a fire dispatch channel listed specifically for Roseville. The county-level fire dispatch channels in the same county: Floyd County Fire 154.4150 MHz, FM, CSQ.
Do fire departments and EMS use a trunked radio system in Roseville?
Yes. The county-level systems that cover Roseville are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Roseville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Roseville?
For Roseville, start with the Floyd Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.