About Bradford Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bradford: Franklin County Fire 154.3250 MHz, FM, 127.3 PL. County-level ems dispatch that covers Bradford: Franklin County EMS 155.3400 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Franklin County Fire talkgroup 30009 (hex 7539).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bradford, start with the Iowa Falls site of Iowa Statewide Interoperable Communications System (ISICS), about 8 miles away. Its control channels: 769.93125, 770.18125, 770.43125 MHz.
Data updated .
Franklin County channels that also cover Bradford
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County Fire | Franklin County Fire – Dispatch | 154.3250 | 127.3 PL | FM | KVP439 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County EMS | Franklin County EMS – Dispatch | 155.3400 | FM | KBP554 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County Hospital | Franklin County General Hospital | 155.4000 In 159.1350 | FM | WQJV676 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Franklin County Fire | Franklin County Fire – Dispatch /Operations | 30009 | 7539 | T |
| Franklin County Fire | Franklin County Fire – Tactical Channel | 30010 | 753a | T |
| Franklin County Fire | Franklin County Fire – Tactical Channel | 30011 | 753b | T |
| Franklin County EMS | Franklin General Hospital/Ambulance | 30013 | 753d | T |
| Franklin County EMS | County Emergency Squad | 30014 | 753e | T |
Nearest trunked radio sites
Distances are measured from the center of Bradford.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bradford?
We do not have a fire dispatch channel listed specifically for Bradford. The county-level fire dispatch channels in the same county: Franklin County Fire 154.3250 MHz, FM, 127.3 PL.
What frequency does EMS or the ambulance service use in Bradford?
We do not have a EMS dispatch channel listed specifically for Bradford. The county-level EMS dispatch channels in the same county: Franklin County EMS 155.3400 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Bradford?
Yes. The county-level systems that cover Bradford are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bradford?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bradford?
For Bradford, start with the Iowa Falls site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.93125, 770.18125, 770.43125 MHz. Program a control channel first; the scanner finds the voice channels from it.