About Garden City Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Garden City: Hardin County Fire 460.4000 MHz, narrow FM, 192.8 PL. County-level ems dispatch that covers Garden City: Hardin County EMS 154.8675 MHz, narrow FM, 100.0 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Hardin County EMS talkgroup 31516 (hex 7b1c).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Garden City, start with the Site-1 site of Iowa State University, about 15 miles away. Its control channels: 859.5625, 860.5625 MHz.
Data updated .
Hardin County channels that also cover Garden City
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hardin County Fire | Hardin County Fire – Dispatch | 460.4000 | 192.8 PL | FMN | WQAQ571 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hardin County Fire | Fire Operations | 154.3550 In 156.2325 | 203.5 PL | FMN | WQAP953 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hardin County EMS | Hardin County EMS – Dispatch | 154.8675 | 100.0 PL | FMN | WQAP953 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hardin County EMS | County Mutual Aid | 155.7450 | 127.3 PL | FMN | KRB612 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hardin County EMS | Hardin County EMS – Dispatch | 31516 | 7b1c | T |
Nearest trunked radio sites
Distances are measured from the center of Garden City.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Garden City?
We do not have a fire dispatch channel listed specifically for Garden City. The county-level fire dispatch channels in the same county: Hardin County Fire 460.4000 MHz, narrow FM, 192.8 PL.
What frequency does EMS or the ambulance service use in Garden City?
We do not have a EMS dispatch channel listed specifically for Garden City. The county-level EMS dispatch channels in the same county: Hardin County EMS 154.8675 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Garden City?
Yes. The county-level systems that cover Garden City are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Garden City?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Garden City?
For Garden City, start with the Site-1 site of Iowa State University. Its control channels are 859.5625, 860.5625 MHz. Program a control channel first; the scanner finds the voice channels from it.