Skip to content

River Sioux Fire and EMS Frequencies

We do not have frequencies listed specifically for River Sioux in Harrison County, Iowa yet. Countywide channels for Harrison County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mondamin (Iowa Statewide Interoperable Communications System (ISICS)), about 7 miles away.

About River Sioux Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers River Sioux: Harrison County Fire 154.3700 MHz, narrow FM, 141.3 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Harrison County Fire talkgroup 31924 (hex 7cb4).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For River Sioux, start with the Mondamin site of Iowa Statewide Interoperable Communications System (ISICS), about 7 miles away. Its control channels: 769.40625, 769.71875, 769.96875 MHz.

Data updated .

Harrison County channels that also cover River Sioux

Fire Dispatch

Fire Dispatch frequencies for Harrison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harrison County FireHarrison County Fire – Dispatch154.3700141.3 PLFMNWZW935

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Harrison County FireFire Operations319247cb4T

Nearest trunked radio sites

Distances are measured from the center of River Sioux.

Mondamin · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 142 (hex 8E) · NAC 4C0 · about 7 mi away
Control 769.40625, 769.71875, 769.96875
Voice 769.21875
Logan · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 41 (hex 29) · NAC 4C1 · about 16 mi away
Control 770.15625, 770.40625, 770.90625
Voice 769.90625
Woodbine · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 141 (hex 8D) · NAC 4C0 · about 18 mi away
Control 772.39375, 772.94375, 774.13125
Voice 770.95625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in River Sioux?

We do not have a fire dispatch channel listed specifically for River Sioux. The county-level fire dispatch channels in the same county: Harrison County Fire 154.3700 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in River Sioux?

Yes. The county-level systems that cover River Sioux are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in River Sioux?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in River Sioux?

For River Sioux, start with the Mondamin site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.40625, 769.71875, 769.96875 MHz. Program a control channel first; the scanner finds the voice channels from it.