Skip to content

MelcherDallas Fire and EMS Frequencies

We do not have frequencies listed specifically for MelcherDallas in Marion County, Iowa yet. Countywide channels for Marion County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Knoxville (Iowa Statewide Interoperable Communications System (ISICS)), about 11 miles away.

About MelcherDallas Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers MelcherDallas: Marion County Fire 154.1450 MHz, FM, 203.5 PL. County-level ems dispatch that covers MelcherDallas: Marion County EMS 155.2800 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Marion County Fire talkgroup 42830 (hex a74e).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For MelcherDallas, start with the Knoxville site of Iowa Statewide Interoperable Communications System (ISICS), about 11 miles away. Its control channels: 769.41875, 770.66875, 770.91875 MHz.

Data updated .

Marion County channels that also cover MelcherDallas

Fire Dispatch

Fire Dispatch frequencies for Marion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marion County FireFire/Rescue Dispatch154.1450
In 150.7750
203.5 PLFMWPQG214

EMS Dispatch

EMS Dispatch frequencies for Marion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marion County EMSEMS Countywide155.2800FMWPBQ828
Marion County EMSMarion County EMS – Dispatch155.400082.5 PLFMWPLX349

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Marion County FireMarion County Fire – Tactical Channel42830a74eT
Marion County EMSMarion County EMS – Dispatch42885a785T
Marion County EMSPublic Health42901a795T
Marion County EMSPublic Health42902a796T

Nearest trunked radio sites

Distances are measured from the center of MelcherDallas.

Knoxville · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 63 (hex 3F) · NAC 4C3 · about 11 mi away
Control 769.41875, 770.66875, 770.91875
Voice 769.16875
Chariton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 60 (hex 3C) · NAC 4C6 · about 17 mi away
Control 769.93125, 770.18125, 770.43125
Voice 769.68125
Warren Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 43 (hex 2B) · NAC 4C2 · about 18 mi away
Control 773.06875, 773.31875, 774.06875, 774.31875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in MelcherDallas?

We do not have a fire dispatch channel listed specifically for MelcherDallas. The county-level fire dispatch channels in the same county: Marion County Fire 154.1450 MHz, FM, 203.5 PL.

What frequency does EMS or the ambulance service use in MelcherDallas?

We do not have a EMS dispatch channel listed specifically for MelcherDallas. The county-level EMS dispatch channels in the same county: Marion County EMS 155.2800 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in MelcherDallas?

Yes. The county-level systems that cover MelcherDallas are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in MelcherDallas?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in MelcherDallas?

For MelcherDallas, start with the Knoxville site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.41875, 770.66875, 770.91875 MHz. Program a control channel first; the scanner finds the voice channels from it.