Skip to content

Meyer Fire and EMS Frequencies

We do not have frequencies listed specifically for Meyer in Mitchell County, Iowa yet. Countywide channels for Mitchell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lourdes (Iowa Statewide Interoperable Communications System (ISICS)), about 24 miles away.

About Meyer Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Meyer: Mitchell County Fire 154.3550 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Meyer: Mitchell County EMS 151.4600 MHz, FM, no tone.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Mitchell County channels that also cover Meyer

Fire Dispatch

Fire Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County FireMitchell County Fire – Dispatch154.3550
In 150.7900
94.8 PLFMNWPYE254

EMS Dispatch

EMS Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County EMSCounty EMS151.4600
In 159.3300
FMWPYE254

Nearest trunked radio sites

Distances are measured from the center of Meyer.

Lourdes · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 59 (hex 3B) · NAC 4C3 · about 24 mi away
Control 769.94375, 770.19375, 770.44375
Voice 769.19375, 769.69375
Northwood · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 97 (hex 61) · NAC 4C8 · about 26 mi away
Control 770.96875, 774.59375, 774.84375
Voice 770.71875
Floyd Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 34 (hex 22) · about 28 mi away
Control 774.33125
Voice 773.58125, 773.83125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Meyer?

We do not have a fire dispatch channel listed specifically for Meyer. The county-level fire dispatch channels in the same county: Mitchell County Fire 154.3550 MHz, narrow FM, 94.8 PL.

What frequency does EMS or the ambulance service use in Meyer?

We do not have a EMS dispatch channel listed specifically for Meyer. The county-level EMS dispatch channels in the same county: Mitchell County EMS 151.4600 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Meyer?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Meyer?

For Meyer, start with the Lourdes site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.94375, 770.19375, 770.44375 MHz. Program a control channel first; the scanner finds the voice channels from it.