About Saylorville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Saylorville: Polk County Fire 151.4600 MHz, narrow FM, CSQ; Westcom Fire 155.8050 MHz, narrow FM, 127.3 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Polk Des Moines Airport talkgroup 49808 (hex c290).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Saylorville, start with the Des Moines/WESTCOM Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 7 miles away. Its control channels: 854.1375, 856.5875, 859.9625 MHz.
- 5 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Polk County channels that also cover Saylorville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Polk County Fire | Fire Paging/Dispatch – Patched to SARA | 151.4600 | CSQ | FMN | WYK686 |
| Westcom Fire | Westcom Fire – Dispatch | 155.8050 | 127.3 PL | FMN | WQRM649 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Polk Des Moines Airport | Aircraft Rescue and Fire Fighting | 49808 | c290 | T |
| Polk Westcom Fire | FIRE Training | 1509 | 5e5 | D |
| Polk UnityPoint Health | Hospital Dispatch Statewide | 48681 | be29 | T |
| Polk UnityPoint Health | Des Moines Ambulances | 48673 | be21 | T |
5 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Polk Westcom Fire | Polk Westcom Fire – Dispatch | 175 | af | D Encrypted |
| Polk Westcom Fire | Polk Westcom Fire – Fire Ground | 177 | b1 | D Encrypted |
| Polk Westcom Fire | Fire/EMS 3E | 179 | b3 | D Encrypted |
| Polk Westcom Fire | FIRE/EMS ALL | 199 | c7 | D Encrypted |
| Polk Westcom EMS | Hospitals Interop | 113 | 71 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Saylorville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Saylorville?
We do not have a fire dispatch channel listed specifically for Saylorville. The county-level fire dispatch channels in the same county: Polk County Fire 151.4600 MHz, narrow FM, CSQ; Westcom Fire 155.8050 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Saylorville?
Yes. The county-level systems that cover Saylorville are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Saylorville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Saylorville?
For Saylorville, start with the Des Moines/WESTCOM Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 854.1375, 856.5875, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.