Skip to content

Plainview Fire and EMS Frequencies

We do not have frequencies listed specifically for Plainview in Scott County, Iowa yet. Countywide channels for Scott County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Muscatine/Scott Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 9 miles away.

About Plainview Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Plainview: Bettendorf Police and Fire Deparment 155.8050 MHz, narrow FM, 179.9 PL; Scott County Fire 154.2200 MHz, narrow FM, CSQ. County-level ems dispatch that covers Plainview: MEDIC Ambulance 453.1750 MHz, FM, no tone.

  • 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Scott County channels that also cover Plainview

Fire Dispatch

Fire Dispatch frequencies for Scott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bettendorf Police and Fire DeparmentBettendorf Police and Fire Deparment – Dispatch – PATCHED155.8050179.9 PLFMNKAP250
Scott County FireScott County Fire – Dispatch – 186.2 PL on input154.2200
In 159.2700
CSQFMNKNGG526
Scott County FireScott County Fire – Dispatch – Unknown Repeater Location154.2200
In 159.2700
203.5 PLFMNKNGG526
Scott County FireScott County Fire – Dispatch – West Lake Park Repeater154.2200
In 159.2700
186.2 PLFMNKNGG526
Scott County FireScott County Fire – Dispatch – LeClaire Repeater154.2200
In 159.2700
131.8 PLFMNKNGG526
Scott County FireScott County Fire – Dispatch – Bettendorf Repeater154.2200
In 159.2700
110.9 PLFMNKNGG526
Scott County FireScott County Fire – Dispatch – Eldridge Repeater154.2200
In 159.2700
123.0 PLFMNKNGG526
Scott County FireScott County Fire – Dispatch – Walcott Repeater154.2200
In 159.2700
162.2 PLFMNKNGG526
Scott County FireScott County Fire – Dispatch – Princeton Repeater154.2200
In 159.2700
79.7 PLFMNKNGG526

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Scott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Scott County FireScott County Fire – Fire Ground154.0700FMNKUQ795
Scott County FireScott County Fire – Fire Ground155.5800FMNKUO255
Scott County FireScott County Fire – Fire Ground156.2100FMNKUO255

EMS Dispatch

EMS Dispatch frequencies for Scott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
MEDIC AmbulanceAmbulance Paging453.1750FMWNLB522

Nearest trunked radio sites

Distances are measured from the center of Plainview.

Muscatine/Scott Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 14 (hex E) · NAC 4C0 · about 9 mi away
Control 773.83125, 774.08125, 774.33125
Voice 773.58125
Wilton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 149 (hex 95) · NAC 4C3 · about 14 mi away
Control 857.5375
Voice 854.4125, 856.1875, 858.5375
Muscatine - Wildcat Den State Park · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 147 (hex 93) · about 15 mi away
Control 853.625
Voice 851.65, 852.1125, 852.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Plainview?

We do not have a fire dispatch channel listed specifically for Plainview. The county-level fire dispatch channels in the same county: Bettendorf Police and Fire Deparment 155.8050 MHz, narrow FM, 179.9 PL; Scott County Fire 154.2200 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Plainview?

We do not have a EMS dispatch channel listed specifically for Plainview. The county-level EMS dispatch channels in the same county: MEDIC Ambulance 453.1750 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Plainview?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Plainview?

For Plainview, start with the Muscatine/Scott Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.83125, 774.08125, 774.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.