Skip to content

Kent Fire and EMS Frequencies

We do not have frequencies listed specifically for Kent in Union County, Iowa yet. Countywide channels for Union County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Union Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 12 miles away.

About Kent Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Kent: Union County Fire 154.3550 MHz, FM, no tone. County-level ems dispatch that covers Kent: Union County EMS 155.8650 MHz, narrow FM, 103.5 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Union County Fire talkgroup 59505 (hex e871).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Kent, start with the Union Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 12 miles away. Its control channels: 770.90625, 774.53125, 774.78125 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Union County channels that also cover Kent

Fire Dispatch

Fire Dispatch frequencies for Union County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Union County FireUnion County Fire – Dispatch154.3550
In 150.7750
FMWPXK622

EMS Dispatch

EMS Dispatch frequencies for Union County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Union County EMSUnion County EMS – Dispatch155.8650103.5 PLFMNKAA599

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Union County FireCounty Fire59505e871T
Union County FireCounty Fire59509e875T
Union County, SD - North Sioux CityFire Operations64254fafeD
Union County, SD - North Sioux CityFire Paging64255faffD
Union County FireUnion County Fire – Tactical Channel59501e86dT
Union County FireUnion County Fire – Tactical Channel59510e876T
Union County FireFire Water Trucks59511e877T
Union County FireUnion County Fire – Tactical Channel (Talkaround)59534e88eT
Union County, SD - North Sioux CityFire Operations64264fb08D
Union County, SD - North Sioux CityFire Operations64265fb09D
Union County, SD - North Sioux CityUnion County, SD – North Sioux City – Dispatch64262fb06D
Union County EMSEMS Operations59518e87eT
Union County EMSEMS Page59520e880T
1 encrypted talkgroup (cannot be monitored)
Iowa Statewide Interoperable Communications System (ISICS) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Union County, SD - North Sioux CityFire Operations64266fb0aD Encrypted

Nearest trunked radio sites

Distances are measured from the center of Kent.

Union Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 64 (hex 40) · NAC 4C2 · about 12 mi away
Control 770.90625, 774.53125, 774.78125
Voice 770.65625
Corning · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 3 (hex 3) · NAC 4C3 · about 15 mi away
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
Mt. Ayr · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 77 (hex 4D) · NAC 4C0 · about 20 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Kent?

We do not have a fire dispatch channel listed specifically for Kent. The county-level fire dispatch channels in the same county: Union County Fire 154.3550 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Kent?

We do not have a EMS dispatch channel listed specifically for Kent. The county-level EMS dispatch channels in the same county: Union County EMS 155.8650 MHz, narrow FM, 103.5 PL.

Do fire departments and EMS use a trunked radio system in Kent?

Yes. The county-level systems that cover Kent are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Kent?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Kent?

For Kent, start with the Union Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.90625, 774.53125, 774.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.