About Coalville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Coalville: Webster County Fire 154.3700 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Webster County Fire talkgroup 61929 (hex f1e9).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Coalville, start with the Fort Dodge site of Iowa Statewide Interoperable Communications System (ISICS), about 5 miles away. Its control channels: 773.84375, 774.09375, 774.34375 MHz.
Data updated .
Webster County channels that also cover Coalville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Webster County Fire | Webster County Fire – Dispatch – 146.2 PL used for voice ops | 154.3700 In 153.9800 | CSQ | FMN | WQGC314 |
| Webster County Fire | Fire Relay – Vincent Tower | 453.1500 | 186.2 PL | FMN | WQKF638 |
| Webster County Fire | Fire Relay – Dayton Tower | 453.1625 | 131.8 PL | FMN | WQKF638 |
| Webster County Fire | Fire Relay – Barnum Tower | 453.2250 | 123.0 PL | FMN | WQKF638 |
| Webster County Fire | Fire Relay – Gowrie Tower | 453.3125 | 162.2 PL | FMN | WQKF638 |
| Webster County Fire | Fire Relay – Lehigh Tower | 453.3375 | 173.8 PL | FMN | WQKF638 |
| Webster County Fire | Fire Relay – Duncombe Tower | 453.7375 | 141.3 PL | FMN | WQKF638 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Webster County EMS | Regional EMS, Response – Mobiles use 192.8 PL | 155.2050 | CSQ | FMN | KLV943 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Webster County EMS | Regional EMS | 155.4000 | FMN | KLV943 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Webster County Fire | County Fire Operations | 61929 | f1e9 | T |
| Webster County Fire | Callendar Fire Dispatch | 61949 | f1fd | T |
| Webster County Fire | Moreland Fire Dispatch | 61960 | f208 | T |
| Webster County Fire | Stratford Fire and Rescue Dispatch | 61964 | f20c | T |
| Webster County Fire | Fire All Call | 61965 | f20d | T |
| Webster County Fire | County Fire | 61926 | f1e6 | T |
| Webster County Fire | County Fire | 61927 | f1e7 | T |
| Webster County Fire | County Fire | 61928 | f1e8 | T |
| Webster County Fire | County Fire Training | 61930 | f1ea | T |
Nearest trunked radio sites
Distances are measured from the center of Coalville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Coalville?
We do not have a fire dispatch channel listed specifically for Coalville. The county-level fire dispatch channels in the same county: Webster County Fire 154.3700 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Coalville?
Yes. The county-level systems that cover Coalville are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Coalville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Coalville?
For Coalville, start with the Fort Dodge site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.84375, 774.09375, 774.34375 MHz. Program a control channel first; the scanner finds the voice channels from it.