Skip to content

Burr Oak Fire and EMS Frequencies

We do not have frequencies listed specifically for Burr Oak in Winneshiek County, Iowa yet. Countywide channels for Winneshiek County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Waukon (Iowa Statewide Interoperable Communications System (ISICS)), about 24 miles away.

About Burr Oak Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Burr Oak: Winneshiek County Fire 154.4450 MHz, narrow FM, CSQ. County-level ems dispatch that covers Burr Oak: Winneshiek County EMS 155.2350 MHz, narrow FM, 167.9 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Winneshiek County channels that also cover Burr Oak

Fire Dispatch

Fire Dispatch frequencies for Winneshiek County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Winneshiek County FireWinneshiek County Fire – Dispatch154.4450CSQFMNKTC804
Winneshiek County FireWinneshiek County Fire – Dispatch – Decorah & Calmar Tower154.4450
In 159.0150
151.4 PLFMNKTC804

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Winneshiek County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Winneshiek County FireWinneshiek County Fire – Fire Ground152.3600167.9 PLFMN—
Winneshiek County FireWinneshiek County Fire – Fire Ground153.7400151.4 PLFMNWQJA850
Winneshiek County FireWinneshiek County Fire – Fire Ground154.3700151.4 PLFMNWPQJ522
Winneshiek County FireWinneshiek County Fire – Fire Ground155.1150151.4 PLFMNWQJA850

EMS Dispatch

EMS Dispatch frequencies for Winneshiek County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Winneshiek County EMSWinneshiek County EMS – Dispatch – Decorah & Calmar Tower155.2350
In 159.3300
167.9 PLFMNWSL666

Nearest trunked radio sites

Distances are measured from the center of Burr Oak.

Waukon · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 5 (hex 5) · NAC 4C3 · about 24 mi away
Control 769.90625, 770.15625, 770.40625
Voice 769.15625, 769.65625
Lourdes · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 59 (hex 3B) · NAC 4C3 · about 25 mi away
Control 769.94375, 770.19375, 770.44375
Voice 769.19375, 769.69375
Chickasaw Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 19 (hex 13) · NAC 4C4 · about 35 mi away
Control 769.96875, 770.21875, 770.46875
Voice 769.71875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Burr Oak?

We do not have a fire dispatch channel listed specifically for Burr Oak. The county-level fire dispatch channels in the same county: Winneshiek County Fire 154.4450 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Burr Oak?

We do not have a EMS dispatch channel listed specifically for Burr Oak. The county-level EMS dispatch channels in the same county: Winneshiek County EMS 155.2350 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Burr Oak?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Burr Oak?

For Burr Oak, start with the Waukon site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.90625, 770.15625, 770.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.