Skip to content

Elwood Fire and EMS Frequencies

We do not have frequencies listed specifically for Elwood in Barber County, Kansas yet. Countywide channels for Barber County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sharon (Kansas Statewide Interoperable Communication System (KSICS)), about 27 miles away.

About Elwood Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elwood: Barber County Fire 453.5250 MHz, narrow FM, 452 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Barber County channels that also cover Elwood

Fire Dispatch

Fire Dispatch frequencies for Barber County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barber County FireBarber County Fire – East Dispatch453.5250
In 458.5250
452 DPLFMNWPCP688
Barber County FireBarber County Fire – West Dispatch453.9750
In 458.9750
FMNWPCP688

Nearest trunked radio sites

Distances are measured from the center of Elwood.

Sharon · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 18 (hex 12) · about 27 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
Wilmore · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 21 (hex 15) · about 32 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Preston · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 16 (hex 10) · NAC 1BA · about 49 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elwood?

We do not have a fire dispatch channel listed specifically for Elwood. The county-level fire dispatch channels in the same county: Barber County Fire 453.5250 MHz, narrow FM, 452 DPL.

What scanner do I need to listen to fire and EMS in Elwood?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Elwood?

For Elwood, start with the Sharon site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.