Skip to content

Olmitz Fire and EMS Frequencies

We do not have frequencies listed specifically for Olmitz in Barton County, Kansas yet. Countywide channels for Barton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Great Bend (Kansas Statewide Interoperable Communication System (KSICS)), about 10 miles away.

About Olmitz Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Olmitz: Barton County Fire 453.4000 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Barton County Fire talkgroup 2526 (hex 9de).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Olmitz, start with the Great Bend site of Kansas Statewide Interoperable Communication System (KSICS), about 10 miles away. Its control channels: 852.1125, 852.4125, 852.75 MHz.

Data updated .

Barton County channels that also cover Olmitz

Fire Dispatch

Fire Dispatch frequencies for Barton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barton County FireFire and EMS tone out453.4000
In 458.4000
156.7 PLFMNWNPI458

Hospitals & Medical

Hospitals & Medical frequencies for Barton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barton County HospitalEMS to Hospital462.9750
In 467.9750
156.7 PLFMNWXP403

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Barton County FireFire and EMS Dispatch25269deD
Barton County FireCounty Fire2088828D
Barton County FireCounty Fire2089829D
Barton County HospitalGreat Bend Hospital ER6802a8D
Barton County HospitalEllinwood Hospital61530f05aD

Nearest trunked radio sites

Distances are measured from the center of Olmitz.

Great Bend · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 19 (hex 13) · NAC 1B5 · about 10 mi away
Control 852.1125, 852.4125, 852.75
Voice 851.8, 853.475, 853.9
Susank · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 59 (hex 3B) · NAC 1B0 · about 12 mi away
Control 856.7375, 857.2625
Voice 856.2625, 857.7375, 858.2625, 858.9625
Great Bend South · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 58 (hex 3A) · NAC 1B5 · about 15 mi away
Control 856.9625, 857.4625
Voice 856.4625, 857.9625, 858.7375, 858.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Olmitz?

We do not have a fire dispatch channel listed specifically for Olmitz. The county-level fire dispatch channels in the same county: Barton County Fire 453.4000 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Olmitz?

Yes. The county-level systems that cover Olmitz are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Olmitz?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Olmitz?

For Olmitz, start with the Great Bend site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125, 852.75 MHz. Program a control channel first; the scanner finds the voice channels from it.