About Walnut Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Walnut: Brown County Fire 154.2500 MHz, narrow FM, 118.8 PL. County-level ems dispatch that covers Walnut: Brown County EMS 155.0700 MHz, narrow FM, 114.8 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Brown County channels that also cover Walnut
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brown County Fire | Brown County Fire – Dispatch | 154.2500 In 153.8300 | 118.8 PL | FMN | WNGC959 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brown County Fire | Brown County Fire – Tactical Channel | 153.9500 | FMN | WNGC959 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brown County EMS | Brown County EMS – Dispatch | 155.0700 In 158.9250 | 114.8 PL | FMN | WNGC959 |
Nearest trunked radio sites
Distances are measured from the center of Walnut.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Walnut?
We do not have a fire dispatch channel listed specifically for Walnut. The county-level fire dispatch channels in the same county: Brown County Fire 154.2500 MHz, narrow FM, 118.8 PL.
What frequency does EMS or the ambulance service use in Walnut?
We do not have a EMS dispatch channel listed specifically for Walnut. The county-level EMS dispatch channels in the same county: Brown County EMS 155.0700 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Walnut?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Walnut?
For Walnut, start with the Reserve site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 857.9875, 858.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.