Skip to content

Washington Fire and EMS Frequencies

We do not have frequencies listed specifically for Washington in Brown County, Kansas yet. Countywide channels for Brown County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Huron (Kansas Statewide Interoperable Communication System (KSICS)), about 4 miles away.

About Washington Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Washington: Brown County Fire 154.2500 MHz, narrow FM, 118.8 PL. County-level ems dispatch that covers Washington: Brown County EMS 155.0700 MHz, narrow FM, 114.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Brown County channels that also cover Washington

Fire Dispatch

Fire Dispatch frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brown County FireBrown County Fire – Dispatch154.2500
In 153.8300
118.8 PLFMNWNGC959

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brown County FireBrown County Fire – Tactical Channel153.9500FMNWNGC959

EMS Dispatch

EMS Dispatch frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brown County EMSBrown County EMS – Dispatch155.0700
In 158.9250
114.8 PLFMNWNGC959

Nearest trunked radio sites

Distances are measured from the center of Washington.

Huron · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 8 (hex 8) · NAC 1B1 · about 4 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Atchison · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 47 (hex 2F) · NAC 1B7 · about 18 mi away
Control 857.0125, 857.5375, 858.1125
Voice 854.5375, 856.1875, 856.6375
Troy · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 7 (hex 7) · NAC 1BA · about 19 mi away
Control 851.575, 852.2875
Voice 851.2, 853.175, 853.325, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Washington?

We do not have a fire dispatch channel listed specifically for Washington. The county-level fire dispatch channels in the same county: Brown County Fire 154.2500 MHz, narrow FM, 118.8 PL.

What frequency does EMS or the ambulance service use in Washington?

We do not have a EMS dispatch channel listed specifically for Washington. The county-level EMS dispatch channels in the same county: Brown County EMS 155.0700 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Washington?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Washington?

For Washington, start with the Huron site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.