Skip to content

Diamond Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Diamond Creek in Chase County, Kansas yet. Countywide channels for Chase County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cottonwood Falls (Kansas Statewide Interoperable Communication System (KSICS)), about 10 miles away.

About Diamond Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Diamond Creek: Chase County Fire 453.1750 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Chase County Fire talkgroup 4446 (hex 115e).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Diamond Creek, start with the Cottonwood Falls site of Kansas Statewide Interoperable Communication System (KSICS), about 10 miles away. Its control channels: 852.4875, 852.775 MHz.

Data updated .

Chase County channels that also cover Diamond Creek

Fire Dispatch

Fire Dispatch frequencies for Chase County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chase County FireChase County Fire – Dispatch453.1750
In 458.1750
156.7 PLFMNKNNJ576

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Chase County FireCounty Fire Dispatch4446115eD
Chase County EMSChase County EMS – Dispatch44571169D

Nearest trunked radio sites

Distances are measured from the center of Diamond Creek.

Cottonwood Falls · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 14 (hex E) · NAC 1B0 · about 10 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Herington · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 67 (hex 43) · NAC 1B0 · about 22 mi away
Control 856.7375, 856.95
Voice 856.275, 857.2125, 859.75
Aulne · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 20 (hex 14) · NAC 1B0 · about 25 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Diamond Creek?

We do not have a fire dispatch channel listed specifically for Diamond Creek. The county-level fire dispatch channels in the same county: Chase County Fire 453.1750 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Diamond Creek?

Yes. The county-level systems that cover Diamond Creek are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Diamond Creek?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Diamond Creek?

For Diamond Creek, start with the Cottonwood Falls site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.