Skip to content

Belleville Fire and EMS Frequencies

We do not have frequencies listed specifically for Belleville in Chautauqua County, Kansas yet. Countywide channels for Chautauqua County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sedan (Kansas Statewide Interoperable Communication System (KSICS)), about 14 miles away.

About Belleville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Belleville: Chautauqua County Fire 39.1000 MHz, FM, no tone. County-level ems dispatch that covers Belleville: Chautauqua County EMS 463.1500 MHz, FM, 192.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Chautauqua County channels that also cover Belleville

Fire Dispatch

Fire Dispatch frequencies for Chautauqua County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chautauqua County FireChautauqua County Fire – Dispatch39.1000FMKNHB563

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Chautauqua County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chautauqua County FireChautauqua County Fire – District 8458.9500FMWPNY324

EMS Dispatch

EMS Dispatch frequencies for Chautauqua County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chautauqua County EMSChautauqua County EMS – Dispatch463.1500
In 468.1500
192.8 PLFMWNDL531

Nearest trunked radio sites

Distances are measured from the center of Belleville.

Sedan · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 8 (hex 8) · NAC 1B9 · about 14 mi away
Control 851.7125, 852.4875
Voice 852.775, 853.075, 853.425, 853.725
Independence · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 4 (hex 4) · NAC 1B5 · about 21 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
Dexter · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 11 (hex B) · NAC 1B3 · about 31 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Belleville?

We do not have a fire dispatch channel listed specifically for Belleville. The county-level fire dispatch channels in the same county: Chautauqua County Fire 39.1000 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Belleville?

We do not have a EMS dispatch channel listed specifically for Belleville. The county-level EMS dispatch channels in the same county: Chautauqua County EMS 463.1500 MHz, FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Belleville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Belleville?

For Belleville, start with the Sedan site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7125, 852.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.