Skip to content

Buffalo Fire and EMS Frequencies

We do not have frequencies listed specifically for Buffalo in Cloud County, Kansas yet. Countywide channels for Cloud County that may also cover this area are shown below when we have them. The closest trunked radio site we have is KSU Campus (Riley County), about 1 miles away.

About Buffalo Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Buffalo: Cloud County Fire 155.9625 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Buffalo: Milonvale EMS 154.9800 MHz, NXDN48, RAN 14.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Cloud County channels that also cover Buffalo

Fire Dispatch

Fire Dispatch frequencies for Cloud County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cloud County FireCloud County Fire – Dispatch155.9625
In 153.9950
114.8 PLFMNKLJ249
Cloud County FireSheriff and Fire158.7975NXDN48WRNZ209
Cloud County FireSheriff and Fire158.8275NXDN48WRNZ209

EMS Dispatch

EMS Dispatch frequencies for Cloud County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Milonvale EMSMilonvale EMS – Dispatch154.9800
In 153.9200
RAN 14NXDN48WPAS847

Nearest trunked radio sites

Distances are measured from the center of Buffalo.

KSU Campus · Riley County
RFSS 37 · Site 37 (hex 25) · NAC 025 · about 1 mi away
Control 856.0125, 856.9375, 857.7625, 858.2625, 858.7625, 859.2625, 859.9375
Concordia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 17 (hex 11) · NAC 1B1 · about 12 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Montrose · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 22 (hex 16) · about 23 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Buffalo?

We do not have a fire dispatch channel listed specifically for Buffalo. The county-level fire dispatch channels in the same county: Cloud County Fire 155.9625 MHz, narrow FM, 114.8 PL.

What frequency does EMS or the ambulance service use in Buffalo?

We do not have a EMS dispatch channel listed specifically for Buffalo. The county-level EMS dispatch channels in the same county: Milonvale EMS 154.9800 MHz, NXDN48, RAN 14.

What scanner do I need to listen to fire and EMS in Buffalo?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Buffalo?

For Buffalo, start with the KSU Campus site of Riley County. Its control channels are 856.0125, 856.9375, 857.7625, 858.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.