Skip to content

Powell Fire and EMS Frequencies

We do not have frequencies listed specifically for Powell in Comanche County, Kansas yet. Countywide channels for Comanche County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wilmore (Kansas Statewide Interoperable Communication System (KSICS)), about 8 miles away.

About Powell Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Powell: Comanche County Fire 155.0550 MHz, narrow FM, 631 DPL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Comanche County EMS talkgroup 687 (hex 2af).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Powell, start with the Wilmore site of Kansas Statewide Interoperable Communication System (KSICS), about 8 miles away. Its control channels: 852.1125, 852.4125 MHz.

Data updated .

Comanche County channels that also cover Powell

Fire Dispatch

Fire Dispatch frequencies for Comanche County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Comanche County FireComanche County Fire – Dispatch / Severe Weather Spotters155.0550
In 153.8600
631 DPLFMNWPLZ788

EMS Tactical

EMS Tactical frequencies for Comanche County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Comanche County EMSComanche County EMS – Tactical Channel463.0750
In 468.0750
192.8 PLFMN—

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Comanche County EMSComanche County EMS – Dispatch6872afD

Nearest trunked radio sites

Distances are measured from the center of Powell.

Wilmore · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 21 (hex 15) · about 8 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Fellsburg · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 20 (hex 14) · NAC 1B4 · about 33 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
Ashland · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 24 (hex 18) · NAC 1B1 · about 37 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Powell?

We do not have a fire dispatch channel listed specifically for Powell. The county-level fire dispatch channels in the same county: Comanche County Fire 155.0550 MHz, narrow FM, 631 DPL.

Do fire departments and EMS use a trunked radio system in Powell?

Yes. The county-level systems that cover Powell are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Powell?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Powell?

For Powell, start with the Wilmore site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.