Skip to content

Ninnescah Fire and EMS Frequencies

We do not have frequencies listed specifically for Ninnescah in Cowley County, Kansas yet. Countywide channels for Cowley County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wellington (Kansas Statewide Interoperable Communication System (KSICS)), about 11 miles away.

About Ninnescah Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ninnescah: Cowley County Fire 453.3000 MHz, narrow FM, 114.8 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Cowley County channels that also cover Ninnescah

Fire Dispatch

Fire Dispatch frequencies for Cowley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cowley County FireCountywide Fire and EMS Dispatch453.3000
In 458.3000
114.8 PLFMNKNCH501

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cowley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cowley County FireFire / EMS Tactical453.2375151.4 PLFMNWPUJ834
Cowley County FireFire / EMS Tactical453.4375192.8 PLFMNWVY623
Cowley County FireFire / EMS Tactical458.3625151.4 PLFMNWPUJ834
Cowley County FireFire / EMS Tactical458.4375151.4 PLFMNWPUJ834
Cowley County FireFire / EMS Tactical458.5125151.4 PLFMNWPUJ834

Nearest trunked radio sites

Distances are measured from the center of Ninnescah.

Wellington · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 64 (hex 40) · NAC 1B0 · about 11 mi away
Control 856.0375, 856.4375
Voice 854.0375, 857.0375, 857.2375, 858.2375
Sumner Co · Sumner County Public Safety
Site 1 (hex 1) · about 23 mi away
Voice 460.0375, 460.1125, 460.1375, 460.1875, 460.3375
Dexter · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 11 (hex B) · NAC 1B3 · about 25 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ninnescah?

We do not have a fire dispatch channel listed specifically for Ninnescah. The county-level fire dispatch channels in the same county: Cowley County Fire 453.3000 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Ninnescah?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Ninnescah?

For Ninnescah, start with the Wellington site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.0375, 856.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.