Skip to content

Otter Fire and EMS Frequencies

We do not have frequencies listed specifically for Otter in Cowley County, Kansas yet. Countywide channels for Cowley County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Dexter (Kansas Statewide Interoperable Communication System (KSICS)), about 8 miles away.

About Otter Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Otter: Cowley County Fire 453.3000 MHz, narrow FM, 114.8 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Cowley County channels that also cover Otter

Fire Dispatch

Fire Dispatch frequencies for Cowley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cowley County FireCountywide Fire and EMS Dispatch453.3000
In 458.3000
114.8 PLFMNKNCH501

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cowley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cowley County FireFire / EMS Tactical453.2375151.4 PLFMNWPUJ834
Cowley County FireFire / EMS Tactical453.4375192.8 PLFMNWVY623
Cowley County FireFire / EMS Tactical458.3625151.4 PLFMNWPUJ834
Cowley County FireFire / EMS Tactical458.4375151.4 PLFMNWPUJ834
Cowley County FireFire / EMS Tactical458.5125151.4 PLFMNWPUJ834

Nearest trunked radio sites

Distances are measured from the center of Otter.

Dexter · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 11 (hex B) · NAC 1B3 · about 8 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Sedan · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 8 (hex 8) · NAC 1B9 · about 17 mi away
Control 851.7125, 852.4875
Voice 852.775, 853.075, 853.425, 853.725
Severy · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 1 (hex 1) · NAC 1B6 · about 37 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Otter?

We do not have a fire dispatch channel listed specifically for Otter. The county-level fire dispatch channels in the same county: Cowley County Fire 453.3000 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Otter?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Otter?

For Otter, start with the Dexter site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.