About Richland Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Richland: Cowley County Fire 453.3000 MHz, narrow FM, 114.8 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Cowley County channels that also cover Richland
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cowley County Fire | Countywide Fire and EMS Dispatch | 453.3000 In 458.3000 | 114.8 PL | FMN | KNCH501 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cowley County Fire | Fire / EMS Tactical | 453.2375 | 151.4 PL | FMN | WPUJ834 |
| Cowley County Fire | Fire / EMS Tactical | 453.4375 | 192.8 PL | FMN | WVY623 |
| Cowley County Fire | Fire / EMS Tactical | 458.3625 | 151.4 PL | FMN | WPUJ834 |
| Cowley County Fire | Fire / EMS Tactical | 458.4375 | 151.4 PL | FMN | WPUJ834 |
| Cowley County Fire | Fire / EMS Tactical | 458.5125 | 151.4 PL | FMN | WPUJ834 |
Nearest trunked radio sites
Distances are measured from the center of Richland.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Richland?
We do not have a fire dispatch channel listed specifically for Richland. The county-level fire dispatch channels in the same county: Cowley County Fire 453.3000 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Richland?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Richland?
For Richland, start with the Dexter site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.