About Sappa Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Sappa: Decatur County Fire 155.7600 MHz, narrow FM, 131.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Decatur County Fire talkgroup 4681 (hex 1249).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Sappa, start with the Oberlin site of Kansas Statewide Interoperable Communication System (KSICS), about 4 miles away. Its control channels: 852.3125, 852.6125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Decatur County channels that also cover Sappa
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Decatur County Fire | Fire and EMS Dispatch (before KSICS) | 155.7600 In 158.8650 | 131.8 PL | FMN | KYD992 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Decatur County Fire | Fire/EMS Dispatch | 4681 | 1249 | D |
| Decatur County Fire | Decatur County Fire – Tactical Channel | 4678 | 1246 | D |
| Decatur County Fire | Decatur County Fire – Tactical Channel | 4683 | 124b | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Decatur County EMS | Decatur County EMS – Tactical Channel | 4682 | 124a | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Sappa.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sappa?
We do not have a fire dispatch channel listed specifically for Sappa. The county-level fire dispatch channels in the same county: Decatur County Fire 155.7600 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Sappa?
Yes. The county-level systems that cover Sappa are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Sappa?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Sappa?
For Sappa, start with the Oberlin site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.