Skip to content

Liberty Fire and EMS Frequencies

We do not have frequencies listed specifically for Liberty in Dickinson County, Kansas yet. Countywide channels for Dickinson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Herington (Kansas Statewide Interoperable Communication System (KSICS)), about 11 miles away.

About Liberty Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Liberty: Dickinson County Fire 154.9650 MHz, narrow FM, 100.0 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Dickinson County Fire talkgroup 1379 (hex 563).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Liberty, start with the Herington site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 856.7375, 856.95 MHz.

Data updated .

Dickinson County channels that also cover Liberty

Fire Dispatch

Fire Dispatch frequencies for Dickinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickinson County FireFire /EMS Dispatch154.9650
In 153.7850
100.0 PLFMNKFO985

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dickinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickinson County FireFire District 1158.8050
In 153.8150
100.0 PLFMNKNNM960

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Dickinson County FireDickinson County Fire – Dispatch1379563D
Dickinson County FireCounty Fire Tactical1376560D

Nearest trunked radio sites

Distances are measured from the center of Liberty.

Herington · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 67 (hex 43) · NAC 1B0 · about 11 mi away
Control 856.7375, 856.95
Voice 856.275, 857.2125, 859.75
Dillon · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 15 (hex F) · NAC 1B3 · about 11 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Junction City · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 54 (hex 36) · NAC 1B3 · about 14 mi away
Control 857.4875, 857.9375
Voice 856.4875, 858.2375, 859.4625, 859.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Liberty?

We do not have a fire dispatch channel listed specifically for Liberty. The county-level fire dispatch channels in the same county: Dickinson County Fire 154.9650 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Liberty?

Yes. The county-level systems that cover Liberty are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Liberty?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Liberty?

For Liberty, start with the Herington site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.7375, 856.95 MHz. Program a control channel first; the scanner finds the voice channels from it.