Skip to content

Willowdale Fire and EMS Frequencies

We do not have frequencies listed specifically for Willowdale in Dickinson County, Kansas yet. Countywide channels for Dickinson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Abilene (Kansas Statewide Interoperable Communication System (KSICS)), about 6 miles away.

About Willowdale Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Willowdale: Dickinson County Fire 154.9650 MHz, narrow FM, 100.0 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Dickinson County Fire talkgroup 1379 (hex 563).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Willowdale, start with the Abilene site of Kansas Statewide Interoperable Communication System (KSICS), about 6 miles away. Its control channels: 855.475, 855.725 MHz.

Data updated .

Dickinson County channels that also cover Willowdale

Fire Dispatch

Fire Dispatch frequencies for Dickinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickinson County FireFire /EMS Dispatch154.9650
In 153.7850
100.0 PLFMNKFO985

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dickinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickinson County FireFire District 1158.8050
In 153.8150
100.0 PLFMNKNNM960

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Dickinson County FireDickinson County Fire – Dispatch1379563D
Dickinson County FireCounty Fire Tactical1376560D

Nearest trunked radio sites

Distances are measured from the center of Willowdale.

Abilene · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 66 (hex 42) · NAC 1B0 · about 6 mi away
Control 855.475, 855.725
Voice 855.225, 856.225, 856.75, 857.275
Bennington · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 16 (hex 10) · NAC 1B2 · about 16 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
Dillon · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 15 (hex F) · NAC 1B3 · about 20 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Willowdale?

We do not have a fire dispatch channel listed specifically for Willowdale. The county-level fire dispatch channels in the same county: Dickinson County Fire 154.9650 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Willowdale?

Yes. The county-level systems that cover Willowdale are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Willowdale?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Willowdale?

For Willowdale, start with the Abilene site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 855.475, 855.725 MHz. Program a control channel first; the scanner finds the voice channels from it.