Skip to content

Iowa Fire and EMS Frequencies

We do not have frequencies listed specifically for Iowa in Doniphan County, Kansas yet. Countywide channels for Doniphan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Troy (Kansas Statewide Interoperable Communication System (KSICS)), about 11 miles away.

About Iowa Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Iowa: Doniphan County Fire 154.0700 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Doniphan County channels that also cover Iowa

Fire Dispatch

Fire Dispatch frequencies for Doniphan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Doniphan County FireRural Fire District 3 – Troy154.0700FMNWPGM863
Doniphan County FireRural Fire District 4 – Elwood154.0925
In 159.0525
032 DPLFMNWQBJ775
Doniphan County FireRural Fire District 1 – Wathena158.7975
In 153.9725
FMNWPYS799

Nearest trunked radio sites

Distances are measured from the center of Iowa.

Troy · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 7 (hex 7) · NAC 1BA · about 11 mi away
Control 851.575, 852.2875
Voice 851.2, 853.175, 853.325, 853.6125
Reserve · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 60 (hex 3C) · about 17 mi away
Control 857.9875, 858.2375
Voice 858.7125, 858.9625, 859.7125, 859.9625
Huron · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 8 (hex 8) · NAC 1B1 · about 19 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Iowa?

We do not have a fire dispatch channel listed specifically for Iowa. The county-level fire dispatch channels in the same county: Doniphan County Fire 154.0700 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Iowa?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Iowa?

For Iowa, start with the Troy site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.575, 852.2875 MHz. Program a control channel first; the scanner finds the voice channels from it.