Skip to content

Wildcat Fire and EMS Frequencies

We do not have frequencies listed specifically for Wildcat in Elk County, Kansas yet. Countywide channels for Elk County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sedan (Kansas Statewide Interoperable Communication System (KSICS)), about 9 miles away.

About Wildcat Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Wildcat yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@fire-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Wildcat.

Sedan · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 8 (hex 8) · NAC 1B9 · about 9 mi away
Control 851.7125, 852.4875
Voice 852.775, 853.075, 853.425, 853.725
Dexter · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 11 (hex B) · NAC 1B3 · about 19 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Severy · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 1 (hex 1) · NAC 1B6 · about 20 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Wildcat?

For Wildcat, start with the Sedan site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7125, 852.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.