Skip to content

Garfield Fire and EMS Frequencies

We do not have frequencies listed specifically for Garfield in Ellsworth County, Kansas yet. Countywide channels for Ellsworth County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ellsworth (Kansas Statewide Interoperable Communication System (KSICS)), about 5 miles away.

About Garfield Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Garfield: Ellsworth County Fire 155.5200 MHz, narrow FM, 023 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Ellsworth County channels that also cover Garfield

Fire Dispatch

Fire Dispatch frequencies for Ellsworth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ellsworth County FireFire and EMS Page Out155.5200
In 158.9700
023 DPLFMNWPJX481

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ellsworth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ellsworth County FireFire and EMS154.7250FMNWPJX481

Hospitals & Medical

Hospitals & Medical frequencies for Ellsworth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ellsworth County HospitalEMS-to-Hospital463.0500
In 468.0500
FMNWNBG886

Nearest trunked radio sites

Distances are measured from the center of Garfield.

Ellsworth · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 24 (hex 18) · NAC 1BE · about 5 mi away
Control 851.55, 851.7625
Voice 851.1875, 852.3375, 853.175, 853.6125
Saline County · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 52 (hex 34) · NAC 1B2 · about 25 mi away
Control 857.4375, 858.2125
Voice 854.9875, 858.4375, 858.9375, 859.4875
Bennington · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 16 (hex 10) · NAC 1B2 · about 28 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Garfield?

We do not have a fire dispatch channel listed specifically for Garfield. The county-level fire dispatch channels in the same county: Ellsworth County Fire 155.5200 MHz, narrow FM, 023 DPL.

What scanner do I need to listen to fire and EMS in Garfield?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Garfield?

For Garfield, start with the Ellsworth site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 851.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.