About Pleasant Valley Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Pleasant Valley: Finney County EMS 155.2950 MHz, FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Finney County Fire talkgroup 2246 (hex 8c6).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 12 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pleasant Valley, start with the Garden City site of Kansas Statewide Interoperable Communication System (KSICS), about 16 miles away. Its control channels: 851.425, 851.575, 851.7375 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Finney County channels that also cover Pleasant Valley
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Finney County EMS | EMS Paging | 155.2950 | FM | KTE558 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Finney County Fire | Rural Fire Dispatch | 2246 | 8c6 | D |
| Finney County Fire | County Fire – Emergency | 2197 | 895 | D |
| Finney County Fire | Rural Fire Tactical | 2247 | 8c7 | D |
| Finney County EMS | Medical Control | 2201 | 899 | D |
| Finney County EMS | Finney County EMS – Tactical Channel (Triage) | 2204 | 89c | D |
| Finney County EMS | Finney County EMS – Tactical Channel (Treatment) | 2205 | 89d | D |
| Finney County EMS | Finney County EMS – Tactical Channel (Transport) | 2206 | 89e | D |
| Finney County EMS | EMS Standby | 2207 | 89f | D |
| Finney County EMS | EMS Standby | 2208 | 8a0 | D |
| Finney County EMS | EMS Administration | 2202 | 89a | D |
| Finney County EMS | EMS Technicians | 2203 | 89b | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Finney County EMS | Finney County EMS – Dispatch | 2200 | 898 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Pleasant Valley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Pleasant Valley?
We do not have a EMS dispatch channel listed specifically for Pleasant Valley. The county-level EMS dispatch channels in the same county: Finney County EMS 155.2950 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Pleasant Valley?
Yes. The county-level systems that cover Pleasant Valley are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 12 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pleasant Valley?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pleasant Valley?
For Pleasant Valley, start with the Garden City site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.425, 851.575, 851.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.