About Fairview Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fairview: Ford County Fire 155.8800 MHz, narrow FM, 192.8 PL. County-level ems dispatch that covers Fairview: Ford County EMS 154.4000 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Ford County Fire talkgroup 2706 (hex a92).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fairview, start with the Dodge City site of Kansas Statewide Interoperable Communication System (KSICS), about 8 miles away. Its control channels: 856.2375 MHz.
Data updated .
Ford County channels that also cover Fairview
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ford County Fire | County Fire (Dispatch before KSICS) | 155.8800 In 153.8450 | 192.8 PL | FMN | WNJP750 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ford County Fire | County Fire – Bloom | 154.4450 In 153.7700 | 192.8 PL | FMN | WPKU953 |
| Ford County Fire | County Fire | 155.1150 In 158.9550 | FMN | WPRJ539 | |
| Ford County Fire | County Fire | 158.7750 In 153.9200 | FMN | WQDY810 | |
| Ford County Fire | County Fire Tactical | 858.9375 In 813.9375 | FMN | WQZS441 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ford County EMS | Ford County EMS – Dispatch (Dispatch before KSICS) | 154.4000 In 150.7900 | FMN | WPWW847 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ford County Hospital | Ambulance to Hospital – Patient Reports | 158.8350 In 153.9650 | 411 DPL | FMN | WPWW847 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ford County Fire | Ford County Fire – Dispatch | 2706 | a92 | D |
| Ford County Fire | County Fire | 2758 | ac6 | D |
| Ford County EMS | Ford County EMS – Dispatch | 2705 | a91 | D |
Nearest trunked radio sites
Distances are measured from the center of Fairview.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fairview?
We do not have a fire dispatch channel listed specifically for Fairview. The county-level fire dispatch channels in the same county: Ford County Fire 155.8800 MHz, narrow FM, 192.8 PL.
What frequency does EMS or the ambulance service use in Fairview?
We do not have a EMS dispatch channel listed specifically for Fairview. The county-level EMS dispatch channels in the same county: Ford County EMS 154.4000 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Fairview?
Yes. The county-level systems that cover Fairview are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fairview?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fairview?
For Fairview, start with the Dodge City site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.