Skip to content

Baker Fire and EMS Frequencies

We do not have frequencies listed specifically for Baker in Gove County, Kansas yet. Countywide channels for Gove County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Quinter (Kansas Statewide Interoperable Communication System (KSICS)), about 10 miles away.

About Baker Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Baker yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@fire-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Baker.

Quinter · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 31 (hex 1F) · NAC 1B5 · about 10 mi away
Control 851.55, 852.3375
Voice 851.275, 852.175, 853.175, 853.35, 853.6125
Morland · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 32 (hex 20) · NAC 1B7 · about 25 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
Oakley · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 42 (hex 2A) · NAC 1B6 · about 34 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Baker?

For Baker, start with the Quinter site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.