About Solomon Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Solomon: Graham County Fire 453.5250 MHz, narrow FM, 127.3 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Graham County Fire talkgroup 1345 (hex 541).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Solomon, start with the Morland site of Kansas Statewide Interoperable Communication System (KSICS), about 4 miles away. Its control channels: 851.7375, 852.0625 MHz.
Data updated .
Graham County channels that also cover Solomon
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Graham County Fire | Graham County Fire – Dispatch (before KSICS) | 453.5250 In 458.5250 | 127.3 PL | FMN | KNFT985 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Graham County Fire | Graham County Fire – Dispatch | 1345 | 541 | D |
| Graham County Fire | Graham County Fire – Tactical Channel | 1346 | 542 | D |
| Graham County Fire | Graham County Fire – Tactical Channel | 1347 | 543 | D |
| Graham County EMS | Graham County EMS – Dispatch | 1342 | 53e | D |
| Graham County EMS | Graham County EMS – Tactical Channel | 1343 | 53f | D |
| Graham County EMS | Graham County EMS – Tactical Channel | 1344 | 540 | D |
Nearest trunked radio sites
Distances are measured from the center of Solomon.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Solomon?
We do not have a fire dispatch channel listed specifically for Solomon. The county-level fire dispatch channels in the same county: Graham County Fire 453.5250 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Solomon?
Yes. The county-level systems that cover Solomon are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Solomon?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Solomon?
For Solomon, start with the Morland site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.