About Township 2 Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Township 2: Harper County Fire 453.8000 MHz, narrow FM, 173.8 PL. County-level ems dispatch that covers Township 2: Harper County EMS 453.0750 MHz, narrow FM, 173.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Harper County Fire talkgroup 2661 (hex a65).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Township 2, start with the Sharon site of Kansas Statewide Interoperable Communication System (KSICS), about 21 miles away. Its control channels: 851.55, 852.3375 MHz.
Data updated .
Harper County channels that also cover Township 2
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harper County Fire | Harper County Fire – Dispatch | 453.8000 In 458.8000 | 173.8 PL | FMN | WPDG447 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harper County EMS | Harper County EMS – Dispatch | 453.0750 In 458.0750 | 173.8 PL | FMN | WPCR921 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Harper County Fire | County Fire Dispatch | 2661 | a65 | D |
| Harper County EMS | Harper County EMS – Dispatch | 2660 | a64 | D |
Nearest trunked radio sites
Distances are measured from the center of Township 2.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Township 2?
We do not have a fire dispatch channel listed specifically for Township 2. The county-level fire dispatch channels in the same county: Harper County Fire 453.8000 MHz, narrow FM, 173.8 PL.
What frequency does EMS or the ambulance service use in Township 2?
We do not have a EMS dispatch channel listed specifically for Township 2. The county-level EMS dispatch channels in the same county: Harper County EMS 453.0750 MHz, narrow FM, 173.8 PL.
Do fire departments and EMS use a trunked radio system in Township 2?
Yes. The county-level systems that cover Township 2 are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Township 2?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Township 2?
For Township 2, start with the Sharon site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.