About Harrison Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Harrison: Jewell County Fire 154.9950 MHz, narrow FM, 151.4 PL. County-level ems dispatch that covers Harrison: Jewell County EMS 155.3550 MHz, narrow FM, 186.2 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Jewell County channels that also cover Harrison
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jewell County Fire | Jewell County Fire – Dispatch | 154.9950 In 158.9400 | 151.4 PL | FMN | WPKJ728 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jewell County EMS | Jewell County EMS – Dispatch | 155.3550 In 150.7900 | 186.2 PL | FMN | WPKM968 |
Nearest trunked radio sites
Distances are measured from the center of Harrison.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Harrison?
We do not have a fire dispatch channel listed specifically for Harrison. The county-level fire dispatch channels in the same county: Jewell County Fire 154.9950 MHz, narrow FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Harrison?
We do not have a EMS dispatch channel listed specifically for Harrison. The county-level EMS dispatch channels in the same county: Jewell County EMS 155.3550 MHz, narrow FM, 186.2 PL.
What scanner do I need to listen to fire and EMS in Harrison?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Harrison?
For Harrison, start with the Montrose site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.