Skip to content

Hoosier Fire and EMS Frequencies

We do not have frequencies listed specifically for Hoosier in Kingman County, Kansas yet. Countywide channels for Kingman County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kingman (Kansas Statewide Interoperable Communication System (KSICS)), about 8 miles away.

About Hoosier Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hoosier: Kingman [City] 453.7625 MHz, narrow FM, 205 DPL. County-level ems dispatch that covers Hoosier: Kingman County EMS 463.1500 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Kingman County Fire talkgroup 598 (hex 256).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hoosier, start with the Kingman site of Kansas Statewide Interoperable Communication System (KSICS), about 8 miles away. Its control channels: 856.7125 MHz.

Data updated .

Kingman County channels that also cover Hoosier

Fire Dispatch

Fire Dispatch frequencies for Kingman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kingman [City]Kingman [City] – Dispatch453.7625
In 458.7625
205 DPLFMNWQCY536

EMS Dispatch

EMS Dispatch frequencies for Kingman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kingman County EMSKingman County EMS – Dispatch463.1500
In 468.1500
192.8 PLFMNWPGE657

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Kingman County FireKingman County Fire – Dispatch598256D
Kingman County EMSKingman County EMS – Dispatch597255D

Nearest trunked radio sites

Distances are measured from the center of Hoosier.

Kingman · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 61 (hex 3D) · about 8 mi away
Control 856.7125
Voice 854.0125, 857.4375, 857.7625, 858.0875, 858.4375
Partridge · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 15 (hex F) · NAC 1B8 · about 14 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 852.55, 853.375, 853.675, 853.975
Preston · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 16 (hex 10) · NAC 1BA · about 21 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hoosier?

We do not have a fire dispatch channel listed specifically for Hoosier. The county-level fire dispatch channels in the same county: Kingman [City] 453.7625 MHz, narrow FM, 205 DPL.

What frequency does EMS or the ambulance service use in Hoosier?

We do not have a EMS dispatch channel listed specifically for Hoosier. The county-level EMS dispatch channels in the same county: Kingman County EMS 463.1500 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Hoosier?

Yes. The county-level systems that cover Hoosier are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hoosier?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hoosier?

For Hoosier, start with the Kingman site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.